Product Description
1. Purpose:
Also known as a quick connector, the excavator quick change connector can quickly install various configuration accessories such as digging buckets, scarifiers, crushing hammers, and other accessories on the excavator, which can expand the scope of use of the excavator, save time, and improve work efficiency.
2. Product features:
Using high-strength materials, hydraulic and electrical accessories such as oil pipes, solenoid valves, and power controllers are required for cylinder control. Hydraulic quick change has a higher safety factor than mechanical quick change.
3. Applicable occasions:
Suitable for various tooling on 4T-50T excavators such as digging buckets, scarifiers, crushing hammers, hydraulic shears, etc. The driver controls the connectors in the cab.
4. Verify
Firstly, verify the tonnage and bucket shaft diameter of the excavator to make a quotation.
model | HC6T | HC10T | HC22T | HC30T | HC45T | HC60T | HC75T |
Axle center distance | 230-270 | 380-420 | 460-480 | 473-540 | 510-580 | 620-710 | 600-800 |
Boom opening gear | 155-170 | 232-315 | 306-340 | 375-411 | 420-510 | 580-670 | 620-750 |
Shaft diameter | 45-50 | 50-70 | 70-80 | 80-90 | 100-110 | 110-120 | 120-140 |
Suitable excavator | 5-8 | 9-16 | 17-23 | 25-33 | 35-48 | 50-65 | 70-79 |
Excavator attachments
| 1 | 200mm narrow bucket with teeth | 10 | Quick Hitch |
| 2 | 500mm Plain bucket | 11 | Semi-automatic hydraulic hitch |
| 3 | Rake | 12 | Hydraulic rotary quick change |
| 4 | Ripper | 13 | Mechanical thumb clamp |
| 5 | Auger | 14 | Hydraulic thumb claamp |
| 6 | Break hammer | 15 | Alin-one hydraulic thumb damp |
| 7 | Grabber | 16 | Fork |
| 8 | Sand bucket | 17 | Trailer |
| 9 | Tilt bucket |
Product Description
1. Purpose:
Also known as a quick connector, the excavator quick change connector can quickly install various configuration accessories such as digging buckets, scarifiers, crushing hammers, and other accessories on the excavator, which can expand the scope of use of the excavator, save time, and improve work efficiency.
2. Product features:
Using high-strength materials, hydraulic and electrical accessories such as oil pipes, solenoid valves, and power controllers are required for cylinder control. Hydraulic quick change has a higher safety factor than mechanical quick change.
3. Applicable occasions:
Suitable for various tooling on 4T-50T excavators such as digging buckets, scarifiers, crushing hammers, hydraulic shears, etc. The driver controls the connectors in the cab.
4. Verify
Firstly, verify the tonnage and bucket shaft diameter of the excavator to make a quotation.
model | HC6T | HC10T | HC22T | HC30T | HC45T | HC60T | HC75T |
Axle center distance | 230-270 | 380-420 | 460-480 | 473-540 | 510-580 | 620-710 | 600-800 |
Boom opening gear | 155-170 | 232-315 | 306-340 | 375-411 | 420-510 | 580-670 | 620-750 |
Shaft diameter | 45-50 | 50-70 | 70-80 | 80-90 | 100-110 | 110-120 | 120-140 |
Suitable excavator | 5-8 | 9-16 | 17-23 | 25-33 | 35-48 | 50-65 | 70-79 |
Excavator attachments
| 1 | 200mm narrow bucket with teeth | 10 | Quick Hitch |
| 2 | 500mm Plain bucket | 11 | Semi-automatic hydraulic hitch |
| 3 | Rake | 12 | Hydraulic rotary quick change |
| 4 | Ripper | 13 | Mechanical thumb clamp |
| 5 | Auger | 14 | Hydraulic thumb claamp |
| 6 | Break hammer | 15 | Alin-one hydraulic thumb damp |
| 7 | Grabber | 16 | Fork |
| 8 | Sand bucket | 17 | Trailer |
| 9 | Tilt bucket |
